Conveyor belt maintenance knowledge of Spiral cooling conveyor For sale
How much do you know about the conveyor belt maintenance knowledge of Spiral cooling conveyor For sale? Let's have a simple understanding together!
1. The conveyor belt should be kept clean during transportation and storage, prevent sunlight, rain and snow, avoid contact with acid, alkali, oil, organic solution and other chemical substances, and avoid electric heating equipment for 1 meter.
2. During the storage period, the ambient temperature in the warehouse should be maintained between -15 and 40, and the air humidity should be maintained between 50% and 80%.
3. When storing, the conveyor belt should be placed in rolls, not foldable. During the storage period, it should be submitted once a quarter.
4. The operating speed of the conveyor belt should not exceed 5.0m/s. When transporting large-capacity and damaged items, and when using mobile plough-type unloading equipment, the low-speed gear should be selected as much as possible. Exceeding the required rate will jeopardize the life of the tape.
5. In order to better reduce the impact and damage of the raw material to the tape, the feeding direction should follow the operating direction of the tape; try to avoid the raw material exploding on the tape; the feeding port should be prevented from above the roller or the drive shaft; buffer The idler interval should be reduced, and mitigation measures should be adopted in the tape receiving section. In order to prevent the tape from being scratched, the rubber sheet with suitable strength should be used for the contact between the scraper cleaner and the discharge device and the tape, instead of the tape on the fabric layer.
The above is a brief introduction to the conveyor belt maintenance knowledge of Spiral cooling conveyor For sale.