The Cheapest Spiral cooling conveyor is a kind of machinery that uses the motor to drive the spiral rotation to push the material to achieve the purpose of conveying. It can be transported horizontally, obliquely or vertically, and has the advantages of simple structure, small cross-sectional area, good sealing, convenient operation, easy maintenance, and convenient closed transportation. So do you know what is the reason why it stopped working? Let's take a simple look below!
1. The material to be conveyed is too viscous, and the Cheapest Spiral cooling conveyor should not transport the material with too much viscosity. If the material is too viscous, it will lead to the accumulation of material, which will cause the screw shaft to stop due to excessive resistance. When conveying viscous materials, we can choose to use the shaftless Cheapest Spiral cooling conveyor.

2. The working time is too long, and the long-term operation will cause the temperature of the screw shaft to be too high or the temperature of the components near the bearing to be too high and the screw shaft to be seriously worn, which will cause the screw shaft to stop rotating. Therefore, it is necessary to stop the equipment properly for maintenance.
3. The material accumulation has not been cleaned up in time. In the process of transporting materials by the Cheapest Spiral cooling conveyor, the material accumulation in the screw shaft cannot be avoided. If the material is not cleaned for a long time, the resistance of the material at the intermediate bearing will also be too large, resulting in the overload operation of the vibration motor, which makes the screw shaft. The axis stops running. Therefore, we need to clean up the materials in the Cheapest Spiral cooling conveyor in time and evacuate the materials accumulated at the bearings.